Conical mill Brief Introduction:
Conical mill is the newest type of milling machines Shanghai Jianye
hasmade. And we have also applied for patents on this product.
Theconical mill is a quite different mill from the traditional
mills in itstypical outlooks, simple structure, excellent
capability and reliableperformance. It is quite suitable for the
construction, the metallurgy,the mining industry, the power
generator, chemical industry and etc.It can be used to crush
various raw materials such as cement, cementclinker, iron ore,
slag, limestone, dolomite, feldspar, quartz,ophiolite, barite,
fluorite, shale gypsum etc.
Conical mill Application:
It has a optimistic application prospect in the fields like the
mining,metallurgy, chemical industry, building materials and other
industries avariety of materials of high fine milling processing,
the finishedproduct granularity range adjustment.
Conical mill Operating Principle:
Thedrive is on top of machine. Motor is run by gear box, to drive
the mainshaft. There are 3 or 4 rollers on main shaft. They are
installed inconical inside liner, and run in revolution and
rotation. The materialis feed from top. With its own weight and
thrust, it becomes intomaterial deck. Grinding by roller again and
again, it becomes intopowder.
The production is released from bottom. Through bucket elevator,it
takes into powder separator. After separating, the fine powder
isproduction. The coarse powder goes back into mill to regrind. In
thiscase, the lifetime for ring and liner is much longer, bcos they
do nottouch each other. Its gap can be adjusted.
Sandgrinding adopts medium speed with medium pressure, continuous
grinding.The material is feed from top and release from bottom.
Grinding andseparator is two step. Grinding liner, main mill shaft,
spring ,thickness of material deck can all be adjusted. Along with
powderseparator, it is very easy to adjust the producdtion size,
and make themachine work well.
Conical mill Technical Specifications:
|Feed in size(mm)||<30||<45||<50|
Note: This specification is just reference, any changes are subject
to the real Conical Mill product