Goodcrete CS introduction:
Goodcrete CS is a kind of mixed solution, which includes inorganic silicate as
main component and some functional additives. It exists as reactive
silicate form such as lithium and sodium. Goodcrete CS is colorless, odorless, nontoxic, nonflammable and not containing
any volatile compounds (VOC), fully in accordance with environment,
health and safety requirements in society today.
Goodcrete CS can effectively control dust from the concrete ground and improve
hardness and wear resistance, which is economical and used easily. Goodcrete CS is made with special formula, so that the concrete treated by Goodcrete CS can better resist chemical erosion and the polished concrete
ground looks more beautiful.
Principles of Goodcrete CS:
Simply, the concrete ground is a kind of cement stone, which is
made of cement and related cementing materials through hydration
reaction. So there are a large number of pores, water channels and
partially hydrated calcium and lime (CaO) within the structure.
Just the above factors influence the strength, wear resistance,
water absorption and dust of concrete ground, therefore we decide
to study and use Goodcrete CS.
When Goodcrete CS is sprayed on the concrete ground, it can penetrate into the inner
through the pores. Then the reactive silicate and calcium oxide
react and form crystalline calcium silicon gel, which is the main
composition of concrete formed by the solidification and adhesion
of hydrated cement.
(1)The calcium silicon gel fills the pores and increases concrete
density, hardness and wear resistance.
(2)The calcium silicon gel reduces the partially hydrated cement
and lime so that it can solve the dust problem.
(3)The calcium silicon gel reduces water flow paths on the surface,
which effectively prevents water and chemicals penetration and
improves water resistance and anti-chemical corrosion of the
(4) Because of Gooodcrete CS, the dense concrete ground looks brighter and more beautiful after
natural friction or polish.
Function of Goodcrete CS:
Goodcrete CS can:
c)Increase the strength and wear resistance of concrete ground;
d)Prevent surface cracking, thermal cracking, dust, scratches,
e)Remove excess alkali and lime.
Instruction of Goodcrete CS:
Before using Goodcrete CS, it needs to remove wax, oil, rubber, acrylic paint or other
surface sealants. If the ground is cleaned by acid, you must
neutralize the acid. The surface should have enough pores for
adequate absorption. The earlier use, the higher compressive
strength it has. In order to make Goodcrete CS fully penetrate the concrete, it is necessary to do thepolishing
and stripping on the surface. The construction methods can change
according to the time and construction quantity:
A）When Goodcrete CS is used on ordinary industrial ground:
Use only once, the usage amount is 12-20 square meters per gallon
(3-5 square meters per kilo).
If Goodcrete CS is used on new concrete ground, you can spray it as soon as after
light work, when people can walk on the ground not having
footprints. In general, it needs