Audi 360 AVM car Reverse Camera system Moving parking guide lines
|Type:Car Parking Camera System||Voltage:12-32||Car Make:FAW GM Kun Cheng|
|Place of Origin:Guangdong China (Mainland)||Brand Name:CLD||Sight:All around|
Packaging & Delivery
1-10sets: 3--7 days. More than 500sets: 25--30 days.
1, 360 degree around view parking
2, Multiple camera and design for the option
3, Night vison camera
Monitor provides a virtual 360-degree scene of the car in
The Around View Monitor※1 is a support technology that assists
drivers to park more easily by better understanding the vehicle’s
surroundings through a virtual bird’s-eye view from above the
vehicle. The Around View Monitor helps the driver visually confirm
the vehicle’s position relative to the lines around parking spaces
and adjacent objects, allowing the driver to maneuver into parking
spots with more ease.
The Around View Monitor processes video from four cameras,
displaying the composite footage on the screen as if there is a
single birds-eye view camera right above the vehicle. This makes
parking much easier.
A ) Intelligent Parking Assist
By watching the images from display not the rearview mirror to
judge the distance between car and roadblock while driver is
backing car. Fewer mistakes on judgment.
B) Expand vision scope
When it makes a turn, front & back 180 degree range of image
could be seen through the display equipment; Knowing if there are
cars on straight direction without move out.
C) Pass by the narrow road & meet vehicles
The distance between car body and left & right obstacle could
be clearly seen by left & right cameras. Help you pass narrow
road & complicated section easily.
D) Driving trajectory correcting
When the car is moving on, keep the front view camera working; if
the car offsets track, it will show on the display to help
correcting the driving trajectory.
E) “Black Box” function
In case of any accident or car scraping, our system can store
images of every direction to SD card ; This data will be used for
technical evaluation during events.
Install the front view camera
1.Open the hood, drill hole in available position of car logo, lead
the camera cable through the hole to engine cover.
2.Arrange the cables along with edge of car head end to gauge
Install the left &right view camera
1. Open the door, separate the door cover and remove the left &
right rearview mirror from the door.
2. Disconnect the mirror lens, and make a hole at the bottom of
rearview mirror frame with size 18.5MM
3. Separate the rearview mirror frame & frame holder.
4. Fix the left or right camera on the hole, and arrange cables
5. Assemble the rearview mirror and connect to the door, tie well
& lead the camera cables to the bottom of gauge board.;
reinstall the door cover.
Install the rearview camera----Installment procedure same as front
Install the control board
1. Separate the gauge board
2. Put bird view control board video cable & DVD original video
3. Put other control wires of control board & car switching