FUTU-60 two-head CNC paper tube machine FUTU-60 two-head CNC paper tube machine Features:
1. For paper tube diameter Ø15-60mm; paper tube thickness 1-5mm
paper tube production.
2. According to different paper tube, tube speed between 0-25 (m /
3 independent drive two machine head covers an area of small,
reducing the space for the production of small diameter paper tube
is the best configuration.
4. CNC tracking cutting, manually adjust the size according to the
order. This structure can make the cutting size more accurate,
without the second precision cutting, which can improve work
5. The main motor for the two Shanghai Simik (2.2kw) This product
is a gear motor, replacing the traditional cycloid motor, with low
noise; strong power, low failure rate and so on.
6. Cutting Taiwan walking for a dedicated product, this motor
speed, torque, good stability, synchronization accuracy, which can
improve work efficiency, and to make the paper tube cutting more
7. Cutting table synchronization chase cutting function to avoid
the conventional cutting paper tube paper gap changes and host
instability, to maximize the quality of the paper tube.
8. Ball Screw Taiwan TBI products, precision screw machining, and
nuts with the gap moderate, no noise, smooth operation, long
9. Inverter is Anritsu products, this product is well-known brands,
the practical value is relatively high, low failure rate, repair
rate is small. By frequency control motor to achieve the machine
10. PLC control system for the special products, the system
response fast, accurate data processing, good stability,
anti-interference ability, together with the professional shearing
servo constitute a perfect combination.
11. The man-machine interface is a special-purpose product that can
input the paper width, paper tube diameter, cutter distance, tube
cutting system and paper tube length through the man-machine
interface. The control system will automatically calculate the
result and realize the speed of tube winding and cutting speed
12. The main relay of the electrical equipment is Chint product;
the cylinder components are Tian Austrian products. These are
well-known brands at home and abroad, with durable, high practical
13. Cutting table walking lubrication through the manual pump
unified raise, easy to operate. 14, the host cut table stainless
steel plate, effectively prevent the bump on its external sex and
oil, and to a great extent to avoid the corrosive glue on the
|Paper tube machine model||FUTU-60type two noses paper tube machine|
|technical parameter||Control system|
|Roll tube paper layer||2-7 floors||PLC controller||Special products|
|Paper tube diameter||15-60 (mm)||Interface||Special products|
|Paper tube thickness||1-5 (mm)||Program version||CX-P9.04|
|Tube speed||0-25 (m / min)||Frequency converter||An Rui Ji products|
|Fixed-length mode||CNC||Main actuator (contactor, etc.)||Chint|
|Winding machine head||Dual-head single belt||Signal element (close to switch, etc.)||Shanghai industrial products|
|Cutting method||CNC automatic tracking cutting||Cylinder element||tian ao products|
|Core mold fixed way||Bolt tight||Synchronous control||X-axis servo ball screw|
|Glue way||Single-sided plastic||Synchronous tracking pipe cutting system||European servomotor|
|Input voltage||380V / 220V|
|Number of operators||1-3 people||Configuration device|
|Size (mm)||Pipe rack||automatic|
|Host Size: L * W * H||3000*1500mm*1600mm||Belt adjustment||Manual adjustment|
|Land area: length * width||11000mm*5000mm||Paper rack swing angle||Manual adjustment|
|Hub diameter||200mm||Automatic alarm for paper deficiency||Yes|
|Hub height||300mm||Glue supply||Automatic stainless steel heating adhesive slot|
|Minimum track||800mm||Tape for lubrication oil||Automatic lubricating stainless steel basin|
|The maximum track||1100mm||Tension regulation||Mechanical regulation|
|total weight||900kg||Paper frame type||Right angle fixed paper rack|
|drive system||Reel mandrel||1|
|monitor rate||2.2 * 2kw Shanghai Simik||Belt reel||1|
|Host speed||1400r / min||Application tools||Yes|
|The maximum wheel speed||72r / min||Base and paper device||Stainless steel bottom paper frame, paper basin|
|Hub output torque||4000N.m||Blanking frame||Stainless steel plate|
|Wheel drive||2 wheel drive||Cutting table top||Stainless steel table-board|
|Cutter motor||0.4kw 1:10 Shanghai Ott||Paper guide wheel||Stainless steel pipe|
|Ball screw||Taiwan TBI|
Note: due to the continuous update of the product technology, all
data to the product sample!
Fixed right angle paper holder
The paper holder is a fixed right-angle paper holder, which
occupies a small area and replaces the traditional cross-shaped
paper holder. It is economical and easy to operate. Shelf axis for
the solid round bar, can make the paper run more smoothly. Tissue
paper on the axis of the tray with high wear-resistant materials
and the level of the step design, both to prevent paper from moving
around but also make the paper roll smooth operation, paper plane
at both ends of the plane design not only guarantees the stability
of the paper roll operation, but also for Paper roll to increase
mobility, paper guide manually adjustability is convenient and fast
for the paper into the mold in advance of the wrong layer, so as to
ensure the smoothness of the paper, the upper and lower guide wheel
made of stainless steel tube height of 1.3 meters for the paper
variable Direction provides sufficient space, the paper is not easy
Spray automatic heating plastic rack
Glue system for automatic pneumatic diaphragm diaphragm, pressure
can be adjusted by the pressure to change the speed of plastic,
convenient, easy to operate; glue part of the tray design is
stainless steel, and suitable for different grades of paper.
Plastic frame for the plastic with a large flow diaphragm pump, the
paper will not appear broken gum. Gum leakage phenomenon. Scraper
rod straight 16 optical axis, not easy to deformation, glue more
evenly. Hose for high wear-resistant silicone tube, squeegee
evenly, use a long time, manual squeegee scraper can be rotated by
scraping the scraping lever to avoid paper scraps caused by the
accumulation of paper on the plastic scraping rod caused by
excessive glue, which affects Paper tube quality, with water
Plastic tank for the stainless steel products, with corrosion
resistance, greatly enhancing the service life of the plastic tank.
Bottom paper holder
The bottom paper holder is a one-time finished structure for
backing paper lubrication and gumming. The end of paper automatic
lubrication system is convenient, clean, easy to operate, uniform
lubrication. Tension control at the end of paper By adjusting the
pressure of the pneumatic valve to control the pressure plate to
control the tension of the end of the paper so that the end of the
paper tension equilibrium.
Automatic feeding rack
The sliding tray of the feeding rack is made of stainless steel
plate, and the high wear resistance of the stainless steel plate
greatly enhances the service life of the stainless steel plate.
Paper Tube Samples
Q:What can you do if the machine broken?
A:Our machine's warranty period is 12months,if the broken parts
can't repair,we can send the new
parts replace the broken parts freell,but you need pay the express
cost yourself.if after warranty period,we can through
negotiationfor to solve the problems,and we supply the technical
support for the whole life of the equipment.
Q:What about the service after sale?
A: One you have bought our machine, you can call us or email us
telling us the machine problems and any questions about the
machines. We will reply to you with 12hours and help you to slove
Q: How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to
Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai
Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
Q:You are trade company or factory?
A:We are trade company but we also have own factories. Building
trade company is just for exporting various types of packing
Q. How long the machine could be made?
A:Normally speaking, machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a