BIFMA X5.2 2017.5 Furniture Testing Machines for Chair Arm and Leg
Durability Testing Machine
Chair Armrest Durability Testing Machine is used to evaluate the
pull-resistance ability of the armrest at parallel direction, to determine its fatigue life under parallel
strength.Fix the caster, set the time, and pulling strength and
time for automatically reposition.
Suitable for wooden chair&stool factory finished products for
durability test(that is the strength under reusing and repeated
loading) simulate furniture in everyday normal use, the strength
and durability of chair arm subjected to load. Suitable for
families, hotels, restaurants and other occasions to use various stool furniture. Not available in
swivel chairs, children's chairs and ceramics, rattan, willow and
other materials stool furniture.
|Armrest Height||650-780mm or specified|
|Timer||LCD, 0.01sec-99.9sec, 1sec-99 minute 99 second|
|Force Stroke||0-24 inch or specified|
|Counter||LCD, 0-999,999 times|
GB/T10357.3-2013: arm static load and durability test method,
EN1335-3 GB/T10357.3-2013 4.6 Arm downwards static load test, BIFMA X5.2 2017.5
1. The instrument uses closed-loop servo control, intelligent
control software, each cylinder is connected a smart chip,
real-time monitoring cylinder output and feedback to the computer. Ensure the accuracy of each output.
2. With solenoid valve, pressure regulating oil and water filter
duplex. Position sensor etc automatically sensing element.
automatically stop the test when the specimen is damaged, 0-999999
test number of tests can be set arbitrarily.
automatic shutdown after reaching the set number, stoppage halfway or power failure can automatically save the test results.
3. The instrument equipped with automatically rise and fall device, don’t need manual
adjustment test height, fully humanized
4. Testing angle can be set arbitrarily, the cylinder can be