Manually Operated Metallographic Sample Preparation Abrasive Cutter
with Safety Device
Technical Data Download: iqualitrol Cutting Machine XCut-344
iqualitrol XCut-344 is suitable for cutting all kinds of specimens
including metallic materials and nonmetallic materials so as to
observe metallographic structure and lithofacies structure.
The cooling circuit could help to prevent burning the sample
metallographic structure due to overheating during the cutting
XCut-344 is quiet convenient , safe and reliable .It is one of the
necessary specimen-making equipment for metallographic test for
factory ,researching unit and college and university laboratory
|Cutting wheel size||Φ300mm x2mm x32mm|
|MAX cutting diameter||Φ100mm|
|Dimension||690mm x790mm x800mm|
How to Cut Larger Specimen?
When cutting a specimen from a larger piece of material, care must
be taken to ensure that it is representative of the features found
in the larger sample, or that it contains all the information
required to investigate a feature of interest.
One problem is that preparation of the specimen may change the
microstructure of the material, for example through heating,
chemical attack, or mechanical damage. The amount of damage depends
on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the
use of a low-speed diamond saw can lessen the problems. There are
many different cutting methods, although some are used only for
specific specimen types. iqualitrol provides the iCut-864 low speed
diamond saw for cutting OM (optical microscope), SEM (scanning
electron microscope), and even TEM (transmission electron