This system uses mechanical filters, activated carbon filter as a
pre-class treatment, the effective removal of suspended solids in
raw water, sediment particles, organic colloids, organic matter,
odor, chlorine and other impurities, with pre-programmed as a
reverse osmosis desalination plant to remove the raw water Most of
the dissolved salts, bacteria, hot stream and so on, to ensure
finished water quality standards. Under normal circumstances, the
system can be placed in automatic operation mode of the work of
continuous operation, automatic monitoring water quality, simple,
stable, safe and reliable.
Pretreat Activated carbon filter
Activated carbon is used wood, coal, shell (nuclear) and other
carbonaceous material through chemical or physical method
activation made. It has a very large number of pores and specific
surface area, which has a strong physical adsorption capacity, the
effective adsorption of organic pollutants in water. Primarily to
remove organic matter in raw water, chlorine, odor, color, etc., so
that the original residual chlorine in water ≤ 0.1mg / l, effective
protection of RO membrane from chlorine damage.
Pretreat 5μm security filter
The third pretreatment, filter spray for the polypropylene melt,
filter housing is ABS material, mainly to remove the vast majority
of very fine suspended solids.
Purified Drinking Water Treatment Plant Small RO Water Treatment
System
The RO system consists of raw water pretreatment , RO unit and
post-treatment. Due to the wide variety of raw waters and the
complexity of the ingredients, it is necessary to select a suitable
pretreatment process to reduce scale and scale and prevent the
performance of the RO membrane from deteriorating. Especially in
the field of reclaimed water and wastewater reuse, the selection of
a suitable pretreatment system will directly affect the stability
of the entire water treatment system.
Therefore, the raw water must be strictly pretreated. According to
different water quality requirements, choose the appropriate after
treatment system to meet the final requirements of aquatic
products. If there are high requirements for microorganisms, we can
choose a combination of ozone and UV disinfection technology.
Thanks to the RO process, we can make the system more stable, lower
energy consumption and water quality guarantee.