Sign In | Join Free | My chinalane.org
chinalane.org
Products
Search by Category
Home > Measuring & Analysing Instrument Stocks >

Stainless Steel 304 Industrial Ultrasonic Cleaning Tanks With Multi Stage Ultra Sonic Mold Cleaner

Categories Industrial Ultrasonic Cleaning Machine
Brand Name: AGSONIC
Model Number: T-2060
Certification: CE
Place of Origin: China
MOQ: 1UNIT
Price: negotiation
Payment Terms: T/T, Western Union
Supply Ability: 1000pcs / Month
Delivery Time: 10working days
Packaging Details: wooden case
Material: Stainless steel 304
Application: Ultra Sonic Mold Cleaner
Name: Multi Stage Ultra Sonic
Used: Injection Mould Utrasonic Cleaning
Ultrasonic power: 3KW
Heating Power: 6KW
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Stainless Steel 304 Industrial Ultrasonic Cleaning Tanks With Multi Stage Ultra Sonic Mold Cleaner


    Injection Mould Utrasonic Cleaning Machine With Multi Stage Ultra Sonic Mold Cleaner


    How Does It Work?
    Ultrasonic cleaning uses high frequency sound waves to generate cavitation in the liquid. The resulting energetic bubble action penetrates blind holes, cracks, and recesses to thoroughly remove all traces of contamination adhering or embedded on the solid surface. Contaminants can include dust, dirt, oil, pigments, grease, polishing compounds, flux agents, soot, and more.
    Cleaning Sequence
    BATH 1: Pre-cleaning and Hot Degreasing
    Complete removal of various forms of surface contamination by means of ultrasound and hot cleaning solutions.
    BATH 2: Rinsing, Grease/Cleaning, Solution Removal
    Rinsing of residual grease/dirt and cleaning solution from the component to avoid cross contamination of subsequent bath.


    How Ultrasonic cleaning machines working
    Ultrasonic cleaning machines work on the principle of agitating cleaning solvents using high frequency sound waves, the ultrasonic agitation creates millions of microscopic bubbles that implode releasing vast quantities of energy, this action, know as cavitations, dislodges any contaminant stuck to the surface of a part, ultrasonic cavitations thoroughly cleans every surface in contact with the cleaning fluid

    Ultrasonic Mold Cleaning Machine


    Ultrasonic Mold Cleaning Machineuses high-frequency sound waves to remove mold residues and fouling from tooling and plates that are immersed in a heated aqueous solution. An ultrasonic generator converts standard line-frequency current into high-frequency electrical energy. The generator is connected to small transducers that are mounted to the bottom or sides of a wash tank. These transducers vibrate at ultrasonic frequencies when the current passes through. This causes the bottom or sides of the tank to vibrate like the diaphragm in a speaker,which scrub and loosen vent residues and grime


    Ultrasonic Mold Cleaning Machine which cleans the components through multi stage ultrasonic cleaning and rinsing processes.

    Rinsing is carried out by ultra pure DM water which is followed by drying through IR, hot air and curing stations. An ultrasonic cleaning process with the help of ultrasonic cleaning machine is a mark of high quality cleaning of varied industrial components. Ultrasonic cleaning is followed by hot air, IR and vacuum drying processes.


    Ultrasonic cleaning action solves all three issues.

    It is thorough because it reaches all mold surfaces immersed in a biodegradable water-based ultrasonic cleaning solution. It is safe because while the cleaning action can be termed “violent” it occurs so fast that highly polished injection mold surfaces are not damaged during the cleaning process. By fast we mean 10 to 15 minutes although large complex molds may require a longer cleaning cycle.


    Plastic Mold Cleaning by Cavitation Action

    Cavitation action is described as the implosion of countless minute bubbles against surfaces of products immersed in the cleaning solution. Bubbles are created when generator-powered transducers bonded to the ultrasonic cleaner tank vibrate at ultrasonic frequencies measured in thousands of cycles per second or kilohertz (kHz).

    Selecting the cleaning equipment is governed to a large extent by the size of molds being cleaned. Ultrasonic cleaners are available ranging from small benchtop units to industrial-sized floor-mounted equipment that can be fitted for automated cleaning and rinsing cycles. But do select a cleaner with a heater, timer and sweep mode.


    The process is fairly straightforward regardless of equipment size. Here’s a simplified description that can be modified based on your specific operations:


    1.Fill the ultrasonic cleaner with water but allow room for cleaning solution displacement due to the size of the molds being cleaned. Add the proper amount of biodegradable cleaning solution concentrate. Ask the scientists at Tovatech to recommend the correct formulation based on the type of contaminants you are removing and what the mold itself is made of.


    2.When you are ready to clean place the injection molds in the cleaner basket. Take care that they do not contact each other. If you are cleaning large parts you may suspend them in the cleaning solution so they do not contact the tank bottom. Some industrial cleaners are equipped with bottom racks to support products being cleaned.


    3.Set the heater to 65 C and timer from 10 to 60 minutes depending on the degree of contamination. Activate the sweep mode to assure uniform distribution of cavitation and promote uniform cleaning then lower the molds into the solution. With experience you will establish optimum cleaning conditions.


    4.At the end of the cycle remove the molds and inspect. When satisfied, rinse them with fresh hot water and allow them to dry or blow them dry with compressed air. Note that intricate configurations and cavities may trap water that should be removed by adding an electric drying oven to your setup.

    Rinsing tip: You’ll want to thoroughly remove cleaning solution residues. Complex shapes may call for a spray rinse or, in certain cases, rinsing by cavitation in an ultrasonic rinse tank.


    How to Clean Large Plastic Injection Molds

    Complex molds require careful cleaning.

    Complex injection molds represent substantial investments by plastic injection molding companies which, in order to protect their investments, must establish cleaning procedures to remove a variety of stubborn contaminants. These include burned on residues, oils, flashing and grease that if allowed to remain will result in product rejection by the quality control department. Hand scrubbing with solvents simply does not do the job. In addition to being time consuming, manual cleaning introduces potential health hazards for personnel and solvent disposal challenges. The solution is using an ultrasonic cleaner instead of scrubbing in a solvent-based parts washer.


    Why an Ultrasonic Cleaner is Ideal for Injection Molding

    In three words: thorough, safe and fast. Contaminants missed by manual cleaning are usually those deep in crevices and on other surfaces impossible to reach. Moreover, highly finished mold surfaces can be scratched or otherwise damaged by manual processes. Large molds can be difficult to maneuver, further risking damage during manual cleaning. And the longer it takes to clean the molds the greater the risk of damage.


    Ultrasonic cleaning action solves all three issues.

    It is thorough because it reaches all mold surfaces immersed in a biodegradable water-based ultrasonic cleaning solution. It is safe because while the cleaning action can be termed “violent” it occurs so fast that highly polished injection mold surfaces are not damaged during the cleaning process. By fast we mean 10 to 15 minutes although large complex molds may require a longer cleaning cycle.


    Product Description

    Ultrasonics: The ONLY Way to Clean with Confidence

    Regardless of the source of the dirt or contamination, AG Ultrasonic Cleaning Systems are designed to accommodate a wide variety of uses in diverse industries. Fast, effective and efficient, our machines will allow you to clean virtually any type of part or component. The following is just a short list of the many different types of items that have been cleaned using our systems.

    • Automotive (Car, Truck, Motorcycle) See Video Below
    • Aviation (Helicopters, Aircraft and Ground Support)
    • Personal Boat & Marine
    • Injection Molds
    • Restaurants, Bakeries & Kitchens (Oven Filters, Burners, Pots, Pans, Utensils)
    • Machines of All Types
    • Tools, Nuts, Bolts
    • Extrusion and Deburring
    • Almost anything made out of metal (ferrous and non-ferrous), plastic, vinyl, and wood.

    3 Tank Injection Molds, Blow Molds Ultrasonic Cleaning Machine With Each Tank's Dimension 1000*700*700mm

    Model No.T-2060
    Ultrasonic tank size(mm)730 x 480 x 760 mm
    Rinsing tank size(mm)730 x 480 x h760
    Capacity266L
    Ultrasonic power3600W
    Heating power9KW
    Transducer numbers60pcs
    Ultrasonic frequency28khz or 40khz
    Timer0~30min adjustable
    Heater20~80C adjustable
    MaterialStainless steel 304
    Power supplyAC220V, 3phase , AC380V/415V 3phase
    OptionalFiltration system

    Quality Stainless Steel 304 Industrial Ultrasonic Cleaning Tanks With Multi Stage Ultra Sonic Mold Cleaner for sale
    Send your message to this supplier
     
    *From:
    *To: AG SONIC TECHNOLOGY LIMITED
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0