Efficient water-based adhesive for PVC paste the vast majority of
good texture and bulk CV absorbent subfloor on the floor.
Without dilution, such as the surface of the open barrel found a
small amount of clear liquid, stir and then need to glue
construction. And then use the appropriate blade (A2) the glue
evenly coated on the substrate, wait about 10 minutes on the floor
tiling mortar. After affixed with pressure roller compaction or
drum roll, in order to achieve a uniform paste effect. Paving
blocks wood floors should be flat to avoid stretching. M735
application meets Chinese building materials industry standard
JC/T550-2008 basic environmental conditions and construction
①A suitable porous absorbent, strong, dry, smooth, no cracks, no
grease, no wax floor.
②For the hard cement-based self-leveling screed.
③For aerial wood flooring, plywood or particleboard cushion.
High tack, strong sticky end After curing extrusion impact
resistant furniture Steering Wheel
Amount of economic environmentally friendly
Subfloor if oil, water and mold release wax , wax water
decontamination required treatment ; minor sand from the ground
suggested M318 water-based primer (porous absorbent subfloor )
bottoming closed; does not smooth ground recommend the use of flat
subfloor self-leveling for leveling ( leveling thickness of at
least 2mm); wet subfloor moisture treatment recommended by two
component epoxy moisture primer. The presence of cracks is
recommended to use two-component epoxy material subfloor repair.
If the temperature is below 15 ℃ construction or relative humidity
greater than 75%, please consult our technical staff opinion. If
the surface of the conjunctiva after opening mortar, you must first
remove, stir before use. Do not glue dumped into sewers or drains.
Unused glue should be sealed. Tools can be cleaned with water.
Packaging and Storage:
25kg plastic pails. The product should be stored at room 5℃-35℃,
prevent freezing, exposure. Shelf life of 12 months.
|Waiting time||About 10 minutes (due to temperature and humidity vary)|
|Construction time||After the completion of total waiting time, about 15-20 minutes
(due to temperature and humidity vary)|
|Load time||≥24 hours|
|Final tack strength||≥72 hours|