White Color Coiled PVC Flooring Adhesive For Vinyl Flooring Roll 7
- 8 PH M760
Efficient water-based adhesive for all types of PVC paste or CV
coil and sheet flooring, foam and PVC carpet backing layer on the
Without dilution, without the need to deploy, with A2 sheet tooth
scraping the glue evenly over the surface coated in construction.
If the surface of the open barrel found a small amount of clear
liquid, stir and then need to glue construction. According to the
construction site of the temperature and humidity, wait about 10-20
minutes after (sticky hands drawing a clear sense of touch) can
spread the glue on the surface of the floor, and then push the
plate with cork flooring flatten, then 50 kg pressure roller
rolling on the paved floor, can achieve better results. M760
application meets Chinese building materials industry standard
C/T550-2008 basic environmental conditions and construction
①A suitable porous absorbent, strong, dry, smooth, no cracks, no
grease, no wax floor.
②For the hard cement-based self-leveling screed.
③For aerial wood flooring, plywood or particleboard cushion.
High initial tack, just lay on the floor is not easy to shift.
Steering wheel chair can withstand indoor squeeze
Construction is easy, the amount of the economy
Subfloor if oil, water and mold release wax , wax water
decontamination required treatment ; minor sand from the ground
suggested M318 water-based primer (porous absorbent subfloor )
bottoming closed; does not smooth ground recommend the use of flat
subfloor self-leveling for leveling ( leveling thickness of at
least 2mm); wet subfloor moisture treatment recommended by two
component epoxy moisture primer. The presence of cracks is
recommended to use two-component epoxy material subfloor repair.
If the temperature is below 15 ℃ construction or relative humidity
greater than 75%, please consult our technical staff opinion. After
opening mortar surface as a film, you must first remove, stir
before use. Do not glue dumped into sewers or drains. Unused glue
should be sealed. Tools can be cleaned with water.
Packaging and Storage:
25kg plastic pails. The product should be stored at room 5℃-35℃,
prevent freezing, exposure. Shelf life of 12 months.
|Waiting time||About 10 minutes (due to temperature and humidity vary)|
|Load time||≥24 hours|
|Final tack strength||≥72 hours|