hardware 110kv coaxial adss clamp

Brand Name:Geto Telecom

Model Number:ADSS Clamp

Place of Origin:China

...Hardware Aerial Network ADSS Clamp Anchor Clamp Overview Anchor clamps enable the dead-ending on cross-arms or pole brackets of aerial fiber optic cables with ADSS structure Ø 8 to 15mm, with HDPE insulation on distribution networks up to 90m spans. ​​​​​​​ These anchor clamps...

Brand Name:HLLP

Model Number:DN1112

Place of Origin:CHENGDU CHINA

Preformed tension set Preformed tension set is made of galvanized steel wire,aluminum-clad steel wire or aluminum-allovy wire,and is intended for use on conductor and strand to install in the transmission and distribution lines.The product grips the ...

Brand Name:HC , OEM

Model Number:HCXF SERIES

Place of Origin:CHINA

Telecom Ransimission Line Hardware Suspension/Tension Clamp For ADSS OPGW Introduction: The Preformed Suspension Clamp is the connecting hardware of ADSS cable which hanging in transmission line pole (tower). It can reduce static stress at the support ...

Brand Name:HENVCON

Model Number:TGY

Place of Origin:China

Down lead clamp for OPGW Down Lead Clamp is used for fixation of OPGW and ADSS onto the pole/tower.It is suitable for all kinds of cable diameter;the installation is reliable ,convenient and fast. Down Lead Clamp is divided into two basic types:pole used...

Place of Origin:Zhejiang, China

Brand Name:DOWELL

Model Number:DW-ES1500

Aluminium Aerial Cable Suspension Bracket CS1500 ADSS Hardware This suspension bracket is an aluminum alloy hardware offering high mechanical performances. It can install on all type of poles: drilled or not, steel, wooden or concrete-made. For drilled ...

Brand Name:PUNAISGD

Model Number:ADSS SUSPENSION CLAMP

Place of Origin:Guangdong, China

...capability, thus extending the lifetime usage. The gentle rubber clamp pieces improve self-damping and reduce abrasion. The suspension clamp brackets can be used for short and medium spans of fiber optic cables, and the suspension clamp bracket is sized to

Brand Name:ZXOFC

Model Number:Downlead Clamp

Place of Origin:ShenZhen,China

...the ADSS/OPGW cable when lead wire to the pole to avoid the cable friction with the pole or others in the wind and protect the cable. For example, on the cable joint pole, the clamp fix the cable from the clamping hardware to the installation location of

Brand Name:Zion communication OR OEM

Model Number:Dead-end for Medium /Long Span ADSS

Place of Origin:CHINA

Dead-end for Medium /Long Span ADSS Dead-end for Medium Span ADSS in tension and large tension Clamp material for aluminum-clad steel wire, mainly used for files larger than 100 meters away from the corner tower, the middle tower and Terminal Tower ...

Place of Origin:CHINA

Brand Name:SKYLYNN or OEM, ODM

... point and increase ant-vibration ability of ADSS cables, and cushioned against the dynamic stress of aeolian vibration. Structure and Material Housing--- It is made of corrosion resistance cast aluminum alloy, which is stable, ...

Brand Name:NTS

Model Number:NTS173

Place of Origin:China

...cable and wire clamp Rolled from carbon steel with straight parallel grooves that will not damage strand The clamping bolts have special shoulders to prevent turning when the nuts are tightened Constructed of high quality steel, hot-dip galvanized used for

Brand Name:UNIFIBER or OEM

Model Number:ANZ---001

Place of Origin:CHINA

... cross section dimensions. Preformed Clamp for wires and heart - shaped ring support, resistance of the wire connected to the tower.The clamp and rotating the outer layer of the wire to the same standards for right-handed, such as L - is needed, should be

Brand Name:TX

Model Number:TX-Con-TNC-01

Place of Origin:China

...Coaxial Cable to SMA Male Connector CNC machined hardware For Antennas CNC machine parts TNC male RF coaxial cable connector hardware for antennas TNC connectors are manufactured in male or female gender in standard polarity or reverse polarity threads, with 50 Ohm impedance. TNC connectors are available in straight or right angle versions, as well as, bulkhead, 4 hole panel or mountless options. These TNC connector designs include clamp

Brand Name:OEM/ODM

Place of Origin:China

...clamp For Base Station installation Cable Clamp is designed for wireless application, and widely used in site installation to fix coaxial feeder cables to base towers, these clamps provide an efficient way of managing & securing the feeder installation system, they are strictly made out of non-rusting product to sustain all weather conditions. They come with angle member adapter and necessary hardware...

Brand Name:OEM/ODM

Place of Origin:China

...base towers, these clamps provide an efficient way of managing & securing the feeder installation system, they are strictly made out of non-rusting product to sustain all weather conditions. They come with angle member adapter and necessary hardware, the

Model Number:J Hook Suspension Clamp

Place of Origin:Zhejiang, China, Zhejiang , China

Brand Name:OEM

#detail_decorate_root .magic-0{vertical-align:top}#detail_decorate_root .magic-1{vertical-align:top;display:block;padding-right:4px;box-sizing:border-box;padding-left:4px}#detail_decorate_root .magic-2{vertical-align:top;padding-bottom:4px;box-sizing:...