Sign In | Join Free | My chinalane.org |
|
Categories | Metering Unit |
---|---|
Brand Name: | Chuangyin |
Model Number: | JLSZVW-12(OMV-12) |
Place of Origin: | China |
Delivery Time: | 25-35 working days |
Packaging Details: | Wooden frame and stretch film |
Highest voltage for equipment Um (r.m.s.): | 12KV |
Rated frequency: | 50, 60 or 50/60HZ |
Standard: | IEC 61869-1:2007, IEC 61869-2:2012 IEC 61869-3:2011,IEC 61869-4:2013 |
Rated primary current: | 5A up to 1000A |
Rated secondary voltage(V): | 100,110,115,120 |
Thermal burden(VA): | 300 |
Company Info. |
Shenzhen Chuangyin Co., Ltd. |
Verified Supplier |
View Contact Details |
Product List |
1. Product introduction:
1.1 Product type name and model: Install the metering box OMV-12, JLSZVW-12 type combined transformer on the 12kV medium voltage overhead column
1.2 Product overview:
This type of metering box is an outdoor dry three-phase primary metering unit. The medium-voltage metering combination transformer is epoxy resin cast and solid-sealed. It consists of two current transformers and two voltage transformers to form three-phase VV wiring, medium voltage The metering combination transformer is vacuum cast with cycloaliphatic epoxy resin (CEP). It has excellent insulation properties and hydrophobicity. The surface is resistant to acid and alkali corrosion, contamination, and UV. It is suitable for outdoor overhead line installation and connection to public power systems. The metering box can be equipped with a metering meter box. All the secondary leads of the transformer can be connected and collected in the meter box. It is also equipped with a test terminal block and a meter installation space. The meter can be configured according to the requirements or the user can configure the meter. Just plug in, and it is suitable for electrical energy metering, current and voltage measurement in urban and rural power distribution network lines with a maximum voltage of 12kV and below.
1.3 Basic parameters:
No. | Item | Units | Specification |
Highest voltage for | kV | 12 | |
rated frequency (fR) | Hz | 50, 60 or 50/60 | |
Rated lightning impulse | kV | 75 kV,95 kV | |
Rated power-frequency | kV | 28 | |
Rated power-frequency | kV | 3 | |
Number of CTs and VTs | pcs | 2VT+2CT | |
Standard | / | IEC 61869-1:2007, IEC 61869-2:2012 IEC 61869-3:2011,IEC 61869-4:2013 |
2. Product function and use:
Overhead pole mounted primary metering unit Comply with the latest
applicable industry standards and local and/or national electrical
regulations. It is used for three-phase overhead power grid energy
measurement management and distribution network automation
management system. The primary side measurement is more accurate,
and the power loss of the line can be effectively measured to
reduce losses.
3. Main features of the product:
1. The integrated solid package of the medium voltage combined
transformer of the metering unit has a compact and beautiful
design, eliminating the need for multiple single transformer
combined installation and ring connection, and can be installed
directly on the pole outdoors, which is convenient and quick;
2. The metering unit can be equipped with a meter box as required
and connected to the transformer connection. The meter is installed
in the box, and the meter box door switch sensor alarm signal is
reserved. The door lock seal structure is designed to prevent
electricity theft;
3. The meter box body is made of corrosion-resistant stainless
steel or low-carbon steel of the same performance, and the sealing
design is weather-proof, and the surface is coated with an
anti-corrosion paint powder layer, which is resistant to acid and
alkali corrosion and UV;
4. The medium voltage combination transformer is insulated with
epoxy resin solid encapsulation, and the surface is dirt-resistant,
UV resistant, and has excellent dielectric and mechanical
properties. Compared with the dispersed single-phase combination
transformer, its size is more compact, oil-free, gas-free
Maintenance to meet the requirements of safe operation and
environmental protection;
5. The CT of the medium voltage combined transformer can be
configured with double transformation ratios, and it is convenient
to set the changeover switch. The VT is equipped with anti-short
circuit and overload protection design to avoid burning and
explosion caused by VT short circuit and overload.
6. The primary connection adopts the contact bar and the terminal
clamp connection. The terminal block of the corresponding area can
be configured according to the user's requirements, the lightning
arrester mounting bracket is reserved, and the lightning arrester
can be configured at the primary end as required.
4. Product technical parameters:
Current transformer specifications
No | Item | Specification |
Rated primary current | 5A up to 1000A | |
Rated secondary current | 5A或1A | |
Rated Continuous Thermal Current | 120%,125%,150%,etc. | |
Rated Short time current (Ith) (thermal 1 second) | 80xIpr,100xIpr | |
Rated Dynamic Current (Idyn) | 2.5xIth | |
Rated Output(VA) | 5,10,12.5,15,20 | |
Accuracy Class | 0.2S,0.2,0.5S,0.5,1 Metering | |
Instrument Security Factor (FS) | 5,10 | |
Applicable Standard | IEC: 61869-1&2 |
No | Item | Specification | |
Rated primary voltage(V) | 10000,11000 | ||
Rated secondary voltage(V) | 100,110,115,120 | ||
Rated Voltage Factor | 1.2/Continuous 1.5/30s | ||
Standard connection | V-V connection | ||
Rated Output(VA) | 15,20,25,30,50,75 | ||
Accuracy Class | 0.2,0.5,1,3 Metering | ||
Thermal burden(VA) | 300 | ||
Applicable Standard | IEC: 61869-1&3 |
If the parameters required by the user exceed the range of the above table, it can be determined after consultation with our company.
5. Product dimensions and wiring schematic diagram:
Wiring schematic diagram
6,special instructions
The company can design and manufacture specially according to the
special requirements of customers.
![]() |