Transparent Cellular Multiwall Polycarbonate Sheet 10mm 6mm 8mm

transparent cellular polycarbonate multiwall polycarbonate sheet uv protection

Honeycomb sunlight panels are mainly made of PC material. Honeycomb solar panels are commonly used in various buildings for light roofing and interior decoration; railway stations and airports waiting lounges and overpasses, passage roofs; bus stations, ferry terminals and other public service facilities roofs and decorative garden vignettes; skylights, cellars, arched roofs and shopping mall roofs; tourism, amusement occasions strange decoration and rest hall; light-transmitting heat insulation and sound insulation barriers street signs advertising, light box advertising and exhibition Deployment; advanced interior decoration board.

Abbreviated as hollow board, pc honeycomb sun panel is the trade name of polycarbonate board. A new type of high strength, light-transmitting, sound-insulating and energy-saving high-quality decorative material widely adopted internationally at present.

(1) light transmission: P C sunlight panel light transmission rate of up to 89%, can be compared with the glass parents. uv coating board in the sun burst will not produce yellowing, fogging, poor light transmission, ten years after the loss of light transmission is only 10%, PVC loss rate is as high as 15-20%, fiberglass is 12-20%.
(2) impact resistance: impact strength is 250-300 times the ordinary glass, 30 times the same thickness of acrylic panels, is 2-20 times the tempered glass, with 3kg hammer below the two-meter drop also no cracks, there is "unbreakable glass" and "ringing steel" reputation. It is known as "unbreakable glass" and "loud steel".
(3) UV protection: PC board is co-extruded with anti-UV coating on one side and anti-condensation treatment on the other side, combining anti-UV, heat insulation and anti-droplet function in one. Can block ultraviolet rays through, and suitable for the protection of valuable works of art and exhibits, so that they are not damaged by ultraviolet rays.
(4) Light weight: the specific gravity is only half that of glass, saving the cost of transportation, removal, installation and support frame.
(5) Flame retardant: The national standard GB50222-95 confirms that P C sunlight panel is flame-retardant grade I, i.e. B1. The ignition point of PC panel itself is 580℃, which is self-extinguishing after leaving the fire and will not produce toxic gas when burning and will not contribute to the spread of fire.
(6) Bendability: It can be installed into arches, semi-circular roofs and windows by cold bending at the site according to the design drawings. The minimum bending radius is 175 times of the thickness of the adopted board, and can also be hot bent.
(7) Sound insulation: P C sunshine panel has obvious sound insulation effect and better acoustic insulation than glass and acrylic panel of the same thickness, under the same thickness, the sound insulation of P C sunshine panel is 5-9DB higher than that of glass.
(8) Energy saving: Keeping cool in summer and heat preservation in winter, P C sunshine panel has lower thermal conductivity (K value) than ordinary glass and other plastics, and the heat insulation effect is 7%-25% higher than the equivalent glass, and the heat insulation of P C sunshine panel is up to 49%. Thus, heat loss is greatly reduced, and it is an environmentally friendly material for buildings with heating equipment.
(9) Temperature adaptability: PC board does not become cold brittle at -40℃, does not soften at 125℃, and its mechanics and mechanical properties do not change significantly in the harsh environment.
(10) Weather resistance: P C sunshine panel can maintain the stability of physical indicators in the range of -40℃ to 120℃. The artificial climate aging test is 4000 hours, the yellowing degree is 2, and the light transmission rate is reduced by only 0.6%.
(11) Anti-condensation: When the outdoor temperature is 0℃, the indoor temperature is 23℃ and the relative humidity is less than 80%, the inner surface of the material will not condense.

started since 2017 and are an influential enterprise specializing in PC (polycarbonate) sheeting and PC profile. We have 2 main production lines and we use 100% virgin Makrolon resin from Bayer and resin from . Our brand pc hollow sheet, solid pc sheet and PC profile which are well know of their stable quantity and it is available in a diverse variety with complete specifications, thus it is able to meet the different requirements of our customers. NILIN products feature super weather and impact resistance, and good light transmission. Light weight, and easy to install, they are widely used in agriculture greenhouse,construction projects, decorative roofing & Transparent partition PC panle ,pc protective cover PC protective glasses,advertising displays and so on. As a result of our products' high quality, competitive price and large selection, NILIN PC sheets sell well both at home and abroad. We sincerely invite interested parties to contact us .